$ --

Introduce several common faults of Mini Solar Mosquito Killer Lights solar mosquito killer lights

1. The light is off

During use, it was found that the mosquito trapping lamp in the solar mosquito killing lamp was not on, but the load light of the controller running indicator was on. If there is high voltage, it is judged that the lamp or ballast is damaged. If both ends of the tube are black, the tube needs to be replaced. Just replace the damaged ballasts and lamps one by one to solve the problem that the lamps do not light up.

2. The light is on without high voltage

When it is found that the mosquito trap of the solar mosquito killer is on but there is no high voltage, it is necessary to check whether the high voltage net is loose or whether the electric shock wire is interspersed. If the high-voltage network is not loose and the electric shock wires are inserted normally, it can be judged that the high-voltage package is damaged, and the problem can be solved by replacing the new high-voltage package.

3. Sulfurized crystal of battery plate

If there is sulfide crystallization in the battery plate of the solar mosquito killer, then it is necessary to check the voltage in the battery of the mosquito killer, because this kind of imagination is generally formed by the over-discharge of the battery, and it should be written on the battery charge If the sulfide crystallization is serious, the battery plates should be replaced.

For more product-related information, please click: Solar Products Manufacturers